Installation of metal sidinginstallation of metal siding draws Today great attention and interest at many consumers. Panels from metal of a special form which can be applied to external finishing works of facades of constructions, fencings and other surfaces happen various appearance. Material can remind fir-trees, ship boards and other images. A large number of forms and color scale of finishing material allows to apply it at implementation of any architectural projects.
The holodnokatny steel covered with zinc and a polymeric layer is applied to production of metal siding. Also under polymer there is still an anticorrosive layer. It is possible to install metal siding in any climatic conditions. Metal panels are material, pure from the point of view of ecology, with a big durability. Metal siding is used for finishing works of residential and country buildings, industrial constructions, warehouse, trade pavilions, institutions of public catering, gas stations. Such metals as copper and aluminum, and also different alloys are applied to production of finishing material.
Installation of metal siding happens to observance of certain simple rules. The distance from the self-tapping screw to the metal panel has to make surely 1 - 1,5 mm. Such length allows a siding to move freely after heating and cooling. For reliable fastening self-tapping screws need to be twisted without initial drilling. The panel has to fastens in each obreshetina with an interval of an obreshetka. For assembly of doborny elements it is necessary to leave the gap equal to 5 - 10 mm, between a panel edge and a doborny component. It is necessary for elimination of risk of change of a form of the panel from - for influences of temperatures. Before assembly of metal panels it is necessary to study attentively a facade, to tap the scattered layings, to clean from a facade of a plant and any designs which can prevent installation of finishing material. By means of construction level it is necessary to measure, whether equal walls and corners of a construction. At identification of considerable differences on a wall, it should be leveled, using an obreshetka. As a result the obreshetka has to be leveled, there should not be defects.