Crusher: compound feed, flour meat - a bone, fish droblenka on a forage of animal
the Crusher animals can use Application
for crushing of many products of a vegetable and animal origin and minerals for feeding and other purposes.
the Crusher crushes everything that animals can use on a forage. This grain, corncobs, hats of sunflower, a bone, fish, meat, chalk, peas and soy with stalks, hay, branches, wood … the Cockleshell and stones it is not desirable for
to crush as the engine bearing can fail.
gives in to Crushing the dry or frozen production better.
Whenever possible when crushing is better to alternate small portions of different products friable, easy, heavy, sticky, loose …
the Crusher becomes by the principle of the coffee grinder.
Undertakes the unnecessary metal capacity of a flank, a pan (vyvarka) on 20 - 100 liters.
In the center of a bottom to be drilled an opening, the engine fastens, it is possible from the old washing machine.
On it (it is possible through a pulley in which to be drilled 2 - 4 openings)
fastens a metal plate length on all diameter of capacity (it is possible to take part of a cloth of a bimanous saw, and it is even better from an industrial power-saw bench). Working part of a plate it is desirable for
to point the Interval between a bottom and a plate of 2 - 5 cm
Capacity from above is closed by a cover with an opening about 10 cm (it is possible to take a cover from the 200th liter metal barrel).
at the very bottom of capacity becomes an opening for an exit of a ready-made product (it is possible to equip with a latch). The opening can be not done, but at the same time it is required to open periodically a cover and a product to remove.
the Crusher can be established on a wooden old wide big self-made chair - a bench or a small little table.
to Include an empty crusher with the closed cover, to allow the engine to develop whole revolutions, to throw raw materials in the portions, listening whatever to overload the engine. After everyone portions an opening for giving of raw materials in a cover to close
as the product departure is possible.
What the raw materials would better be split up and left a crusher better to incline towards a vysypny opening.
also depends On a crusher inclination a krupnota of a grinding.
the Inclination is chosen by practical consideration depending on a product.
If a crusher from an overload stops urgently it to cut off power, otherwise the engine can fail. Protection on the engine to put
there is no sense as it is not desirable to leave a crusher in operating time.
to pulverize dry production a vysypny opening should be covered for a while.
On this and other 1200 subjects
you can find fuller information in Anatoly Len`s book “Guide“ (1536 pages) and draft copies for “the Guide - 2“.
the Book and draft copies can be read on the author`s website