Rus Articles Journal

302 inventions of

BUSINESS - PLAN ROTOR apxu CAR. ru/article/izmalkov/rotor/bp_rotor12. htm

BUSINESS - the PLAN the VORTEX apxu HEATGENERATOR. ru/article/izmalkov/bpteplogen /

BUSINESS - the PLAN the ENGINE WITH EXTRA HIGHWAY of PODV. apxu TEPOLA. ru/article/izmalkov/engine / BUSINESS - the PLAN VORTEX

HEATGENERATOR sciteclibrary. ru/rus/catalog/pages/10879. html

BUSINESS - the PLAN the ROTOR apxu CAR. ru/article/izmalkov/rotor /

sciteclibrary. ru/rus/catalog/pages/9414. html - The ROTOR

CAR BUSINESS - the PLAN the ENGINE WITH EXTRA HIGHWAY of PODV. apxu TEPOLA. ru/article/izmalkov/engine /

sciteclibrary. ru/rus/catalog/pages/9518. html - The ENGINE WITH the EXTERNAL SUPPLY of HEAT

BUSINESS - the PLAN the VORTEX apxu HEATGENERATOR. ru/article/izmalkov/bpteplogen /

BUSINESS - the PLAN the ELECTROMAGNETIC sciteclibrary CAR. ru/rus/catalog/pages/10875. html

ROTOR PUMP of REPLACEMENT apxu. ru/article/izmalkov/rotor /

apxu. ru/article/izmalkov/engine/chertegy. htm - The PROTOTYPE on the ENGINE with VPT

apxu. ru/article/izmalkov/rotor/bp_rotor12. htm - The PROTOTYPE ON the MOUTH. PUMP VYTESN.

of apxu. ru/article/izmalkov/bpteplogen/genother. htm - The PROTOTYPE ON the VORTEX

HEATGENERATOR I made 302 very different inventions (the most part on new power, filters to thin productive water purification, pumps, cycle mobiles, the vortex heatdrill, to the gas weapon and cars) with excellent business - plans, watch them on the websites on keywords “ Izmalkov Herman “ I will sell patent rights, a noa - Hau, I will construct plant and I will bring products to mass production if my inventions are interesting to you, then come on apxu. ru and there on a line at the left on “ Herman Izmalkov, inventions “ there are many descriptions with drawings to patents and applications, 0504516461, 38(061)224 - 13 - 89 geizmalkov@yandex. ru, Skype: magtelom, proza. ru/2010/02/16/412, proza. ru/2010/03/28/209, vdcr. ru/content/view/1876/229/, matri - x. ru/energy. shtml, com. ua/izobr1. html, proza. ru/2009/11/12/29, proza. ru/2010/06/01/307, ucoz. ru/publ/izobretenija_germana_izmalkova/6 - 1 - 0 - 212, h12. ru/, inno - expert. ru/forum/? post=13551 &page=1, vynahidnyk. org. ua

to patents and applications, germanizmalkov@yandex. ru, 80504516461, (38061) 224 - 13 - 89,

Electromagnetic car has not magnetic disk rotor on which permanent magnets which interact with the same quantity of electromagnets on the stator which inclusion happens on everyone a floor - a turn on each turn of a shaft at the time of coincidence of the poles of the same name of a permanent magnet and an electromagnet are established. As the second everyone a floor - a turn the torque is formed at the switched-off power supply at the expense of currents of a self-induction of efficiency of this device it is more than 100% therefore this device can be considered as the fuel-free engine.

The electric motor - the generator of current has on a disk rotor from

dielectric evenly located permanent magnets which can be the flat lateral surfaces with the minimum gap in cuts of magnetic conductors of the electromagnets established on a statator which quantity on unit differs from quantity of constant magni and which have connection to the power supply network via switches of the direction of current. These perklyucheniye occur at the time of coincidence of neutral zones of a permanent magnet and an electromagnet at the time of passing by a permanent magnet through a magnetic conductor of an electromagnet and this circumstance allows all parts of all magnetic fluxes to influence always rotation of a rotor only in one direction. The electric motor works at any currents, and at its inclusion on a direct current (then at it the speed of rotation depends on working resistance on its shaft) it passes at achievement 2000 revolutions per minute into the mode of the generator of current and further works as the bestplivny engine without obtaining energy from the outside. The electric motor at start does not demand starting arrangements and reliably works also at overloads.

The engine with an external supply of heat is made in the form of radial connection by the tense twisted springs with their continuations which are in heating zones - coolings, in the form of tonkotely plates or a wire of steel with big coefficient of thermal expansion, a disk with an external ring and at the same time shaft, rigidly and coaxially connected with a disk and with a ring are excentric among themselves. This eccentricity distorts uniformity of effort of stretching of springs and these distortions are symmetric concerning the eccentricity plane. When heating one symmetric half and cooling other symmetric half balance of these tension concerning the plane of eccentricity is broken and there is a torque. There is no efficiency to 85%, thermal zones separately, any systems, except system of blocking of giving of heat to a set in bulk from a starter of speed of rotation of 1000 turns minute.

The rotor car (pumps, compressors, heat engines and drives) of

contains 2 drums which are in the case with a possibility of rotation and which are connected among themselves by two diametrically located teeths with the big height of tooth in such a way that on one drum there are teeths, and on another - gear hollows, and at the same time other surfaces of drums the executed by gear wreaths with the small height of tooth, big teeths of one drum and small teeths of other drum slide the tops on internal cylindrical surfaces of the case, both gear gearings of a skorregirovana so that their initial circles coincide also they with the constant transfer relation equal to unit are in gearing, gearing of teeths with small height is consolidation between entrance and output openings of a working chamber.

The vortex heatgenerator is intended for economy of the electric power when receiving heat, has efficiency to 700% and contains the screw executed with a step of the screw line of its navivka, uneven on length, in quality of a zavikhritel has no analogs in the world. Zavikhritel lamellar and perforated in which the twirled stream of liquid hits from firm surfaces of barriers have the vortex heatgenerators developed in the world and there is a gap with a pressure up to 2000 atm and temperature to 1000*C vials of steam and air which are formed in zones of the lowered pressure which are behind these barriers in the direction of a stream, on these surfaces cavitational destructions are formed and there are harmful noise, in my device there is no all this as the shock phenomena and zones of the lowered pressure are formed by water hammers in stream depths from - for unevenness of a step of a navivka of the screw line of the screw.

The vortex heater of environments has the case in which on a shaft

of the electric motor - the generator of current there is a zavikhritel executed in the form of the screw having a step of its screw line, variable on length, and gathered from tuning forks works at water as the vortex heatgenerator, and at air as the air heater (at achievement of rotation of this screw of 2000 revolutions per minute it together with heating of air begins to work in the mode of the molecular fuel-free engine without obtaining energy from the outside, the electric motor addresses in the generator of current and will read to give current to a network. Shock vibrations in a stream from unevenness of a step of the screw line of the screw and a nabrannost it from tuning forks create conditions under which receiving thermal energy due to interactions at the level of elementary particles of matter of a stream to fields (the torsion and others) world space happens a stream. The efficiency reaches 700%.

Vortex heatdrill - it is very favorable alternative to a boring chisel which cost is big as its cutting tool are expensive diamond cutters. The offered device allows to do without boring chisel which role in the new device carries out the twisting water flow, crumbs of breeds through which to this moment there is a drilling. Water has temperature 1000*C and powerful ultrasonic fluctuations. All other equipment of the drilling rig remains the same, but addition of clay or lime in given to the place of drilling is not required - water flow in the place of drilling takes them replacement from soil, the new equipment is not more difficult old, its basis is represented by the screw executed in a special way. The new drilling rig allows to make a driving always from the first, so has no basic reactions when drilling.

Installation for desalting of water has the case in which the zavikhritel executed in the form of the screw gathered from

of tuning forks with an uneven step of its screw line rotates with the

drive from the electric motor. The freshened

water pursues via the case the screw and at the same time in its stream there are

water hammers from unevenness of a step of the screw line of the screw and

vysokchastotny waves from vibrations of tuning forks, all this together causes

in the freshened water, its evaporation and condensation in fresh water.

Big formation of heat (installation efficiency to 700%) happens from - for

of interaction of water at the molecular level to the fields of world space,

giving it the energy. This zavikhritel has no analogs in the world, at

of similar devices heat is formed at firm surfaces of obstacles for

of a stream of liquid (are carried out in the form of plates or the pro-thinned-out openings) by

and on these surfaces there is a cavitational destruction and allocation of harmful

for the person of noise, there is no All this in the offered device because

all these processes occur in the thickness of a stream.

the Wind turbine has horizontally installed current generator with a wind plate installed on a support on the vertical hinge and having on a shaft thin-walled the basis from the current generator conic vetrozakhvat in which there is top outside a thin-walled cone on which the zavikhritel in the form of the screw with a step of its screw line, variable on length, and gathered from tuning forks is established. The wind plate establishes the current generator always so that vetrozakhvat by the entrance it is directed to the wind front. Wind stream, passing through a zavikhritel, receives pneumatic blows from - for the fact that the step of the screw line of a zavikhritel variable and also occurs vibration of tuning forks, it causes allocation of heat in an air stream as fields, for example the torsion, give energy to this stream of air under these circumstances, and increase the gone-down power level due to energy of world space. At an exit from a vetrozakhvat through a box, the rotations located on a tangent to a circle, the warmed air has big energy and it allows this wind turbine to be much more effectively on the given power, than other wind turbines of the same dimensions. At heavy wind the zavikhritel can give a torque which will allow to work at rotation of a shaft of the generator of current of 2000 and more turns minute to a zavikhritel as the fuel-free engine without energy supply from the outside. Installation of a wind turbine has the pneumoaccumulator with system vetroprivod - the compressor - a pneumatic actuator - the current generator.

The molecular engine works at air, the zavikhritel on a shaft has the electric motor - the current generator executed in the form of the screw with a step of its screw line, uneven on length, and gathered from tuning forks. For start of the molecular engine we turn on the electric motor which untwists the screw of a zavikhritel to 2000 revolutions per minute then when passing through a zavikhritel air heats up and its thermal expansion creates a torque more, than a torque on an electric motor shaft, and it forces the electric motor to work in the current generator mode. The molecular engine after its start via this generator of current gives the electric power to a network or directly on any electric device. Such big heating of air proikhodit because unevenness of a step of the screw line of the screw and vibration of tuning forks create pneumoblows in a stream of the air passing through the screw at the molecular level under such circumstances air receives energy from fields, for example, the torsion who I compensate decrease of the power level due to energy of world space.

The cycle mobile is executed with pnevprivody, the consisting their rotor pneumoengine connected through entrance and output openings to each of two capacities changed by pressing through respectively entrance and output valves. For one cycle driving wheels make quantity of revolutions which is equal to the relation from division of volume of press capacity into the working volume of the rotor pneumoengine. The box of speeds as amplitude of work of legs which is not fixed &ndash is not required; with a small amplitude the leg can overcome much easier even the biggest effort. The drive can be installed in situation, convenient for work, the trajectory of work of legs the elementary and allows to strain evenly to all muscles of legs that provides big comfort of driving and smaller exhaustion, the drive can be carried out very easy and reliable in work without an opportunity will become dusty and to lose from this efficiency. According to 22 patents No.: 1683741, 1688869, 1698544, 1785675, 1787222, 1789212, 1803342, 1832020. 1833648. 1833180, 1833181, 2000093, 2000243, 2000244, 2000246, 2003303, 2002657, 2043239. 2043240. 2047633, 2028960, 2071434 I offered muscular drives: bicycles, cycle mobiles, wheelchairs and scooters. All of them have essentially new schemes giving improvement of all indicators on several orders. All of them have the unstable amplitude of work of hands or legs that excludes a box of speeds. If to use elements of the electric drive and DVS in these devices, then the effect will be even more.

The centrifugal filter has the case in which the rotor rotates, of their screw lines made by two with the different directions the screws executed one in another on one pipe and at the same time top is executed by conic, there is an adjustable gap for an exit of the rest of the filtered liquid together with undesirable inclusions in number of 2 - 5% of initial amount of the filtered liquid. The filter has performance for a thin filtration, including office and microorganisms among which is also unhealthy the person, and for more rough filtration, for example, receiving vegetable oils, already ready for consumption. On the first execution the filter can be executed highly productive and demanded in constructions of preparation for consumption of drinking water in big and small settlements, this filter is self-cleaning and can long work without its stop for scheduled maintenance.

The mass propeller - the gravitational engine is the driving device for the bezoporny vehicle. This device has no analogs in the world. Its difference from the existing devices of this appointment is that in this offered device there is no returnable movement, and there is only a progress of its all details and level of vibrations from - for it is much lower, and the efficiency is much higher. Installation of this propeller on the vehicle will allow it to move on any off road terrain, not to have drifts at ice and will make the vehicle independent of quality of a paving both very convenient and safe for its driving. Many times over will reduce maintenance costs of roads and by repair of the vehicle. When performing its sufficient power this mass propeller will be used to flights on the aircraft.

At installation of the mass propeller in vertical position it turns into the effective gravitational engine.

Gravitational &ndash engine; uprugosilovy &ndash engine; it is almost same engine, only in the first case freights are suspended, and in the second case freights are replaced with springs. The second case has advantages in the weight of all device, and the first case would haveolshy resource of work without replacement of any details. The device has a cranked shaft with the changing distance between an axis of a knee and an axis of rotation in the course of one running cycle.

The gas gun is executed on the basis of the invention “ Izmalkov`s Gun “ according to the USSR patent No. 1804589 (the description and drawings can be seen on the website on keywords “ Izmalkov Herman “ also it is necessary to specify the « magazine; Weapon and hunting “ No. 7 for 2000) by removal of the mechanism of disclosure of state part and introduction of a brake mechanism for the gas container at the time of its launching by a flannelette spring (itself of baizes leaves) of the gun. The gas container has 2 positions of blocking of its disclosure. The first position works at the time of a shot, and the second - when the container loses flight speed to zero. This weapon is very favorable in its application: the malefactor does not hear carrying out a shot and the container can get it on safe for defending distance - the gas cloud after disclosure of the container will be in the place of disclosure of the container. Defending cannot injure (in the gas guns used now the probability of hit of the heated gunpowder particles in eyes to the forward is very high) the forward as a shot same, as at the children`s gun - there is a spring launching of the container.

The garbage-disposal car has very powerful vacuum cleaner giving it the chance to collect garbage weighing up to 1 kilogram on a simultaneous site of 4 square meters. This vacuum cleaner is equipped with very effective compressor according to my 2 inventions “Rotor car“ of MM.

The offered alternative to a cranked shaft represents external gear gearing of several cogwheels connected by transformation mechanisms vozvratno - progress in rotary with the rods which are rigidly connected with pistons. The last mechanisms here me it is offered two: without action of magnetic forces and with action of magnetic forces. This alternative allows to get rid of a rod which gives lateral loadings which lower efficiency on the piston and create mutual attrition of the piston and cylinder, besides this alternative allows to change volume over piston space without any violations in the block of cylinders, and change of the beginning and end of a piston stroke, without changing length of the course, but it here specifically is not shown not to increase as it is big information. You watch patents of the Russian Federation No. No. 1808211 and 1650990 according to the item 2 formulas of the invention.

The offered wave engine uses energy of a wave in open reservoirs in windy weather, has a hydraulic engine, a float and the generator of current. Its production technologically, the knots which are widely applied in other products can be used, on a shaft of the generator of current rotation with high angular speed moves. The device is reliable and safe.

The device is used in elevators, various elevators including mine. This device has many advantages before widely applied (they, as a rule, are run by electronics which, judging by messages in news on television, already many times brought from - for what there were human victims), it will never bring as at a movement reverse it leans against motionless part on all process of a reverse, this device is exclusively simple and very reliable.

The offered grinders are offered in two options: for large crushing of plastic bottles and for further crushing in the same technological chain to particles of the smaller size which by the small sizes can be already filled up in press forms for further receiving details of a certain form from them.

The offered cardan transfer is the most effective of all known because in it contacts on a torque transmission come without any deviations from the bisector plane and synchronism of a torque transmission is equal to 100% and it means that in the kinematic scheme passing through this cardan transfer there will be no vibrations that provides not to have losses of efficiency and destruction of details.

The wheel has the increased consumer properties, so it has no pneumatics, but has to a tezha demferiruyushchy properties, as a wheel on pneumatics. Due to that, the wheel has only a thin uniform layer of rubber in the form of a protector for coupling of a wheel with the road, it does not demand special balancing as its details are made of metal which has, unlike rubber, specific weight on its volume same everywhere, and production from metal is in rigid dimensional limits.

The offered carriage for disabled people differs in the transformation mechanism vozvratno - a rotary motion in rotary. In the offered carriage this mechanism of transformation is much more compact, more convenient in work and has bigger efficiency.

The offered conveyor differs from widespread in the fact that it has higher than an efficiency. The tape cloth at it is made of metal or rigid plastic, performance cheap and technologically.

The magnetic engine contains 2 closed magnetic tapes established with a tension on the rams rotating in one plane on one platform and at the same time tapes as much as possible before sliding almost without friction are pulled together by one drums and straight sections of these tapes make an acute angle. The device works as the fuel-free

engine.

The offered magnetic engine belongs to power devices which use energy of permanent magnets at their interaction with each other. This device rather simply and technologically in production, at the correct production (forces of constant magni act effectively on small distance) it is possible to receive the device which on a shaft of selection of power will give a big torque at its big turns.

The offered milkchurn - the rotor high-performance device executed on the basis of pumps with alternate delay of the movement of their rotors.

Makholet with valvate system of a wing has two versions of the drive: internal combustion engine and muscular drive. This aircraft maloenergozatraten as makhokryly system of flight, in distinguishing from screw, has no fast rotations in interaction with air and the small tilt angle of a wing on the relation of its longitudinal plane on a triangle of decomposition of vectors of speeds creates the high longitudinal speed of the movement of a makholet. Makholet has the internal combustion engine is more low-power, but through a reducer with large transfer number his wings have a big torque at their move. Operation of the screw is less effective for progress flying the device, than work of the waving wing.

The offered mechanism of transformation of the movement for volume cars the most effective of all known, it is simple in production, in it is not present, unlike the analogs difficult in performance of surfaces, it is technological and has small prime cost in production.

The offered coupling of coupling is very simple and reliable on the device, it could be very successfully used everywhere and especially in automatic transmissions, it is technological and has small prime cost in production.

The offered coupling coupling from - for the fact that it has no frictional surfaces can be used very effectively in fire-dangerous conditions, for example, in mines, this coupling is simple and technological in production, has small prime cost in production, all indicators in work at are not really high.

Has safety a svoytv.

The offered transfer simplifies and reduces the price of performance of devices for transfer of rotation on other shaft parallel to it with the transfer relation equal to unit, with the direction in the opposite direction. Now such device extended everywhere is internal gear gearing with the transfer relation equal to unit.

Transfer with bodies of swing has transfer relation of one step to 30 - ti, coaxial among themselves entrance and output shaft, small dimensions, high efficiency, technological and has low prime cost in production.

The offered device most of all approaches as the high-speed vehicle, to disabled people who have good health and a greater effect in hands this device can be installed on many wheelchairs by means of clamps with installation on an oska wheel, this device polzvolit quickly to move to long distances, it technologically, has small prime cost in production.

The similar scooter has the hinged mechanism of transformation of the movement which compact and reliable, it distinguishes it to the best in comparison widespread in which the torque is formed on small coal of a full circle and besides at the expense of the bending moments. The offered scooter has small dimensions, is technological and has small prime cost in production.

The offered device very much simplifies procedure of switching of speeds when driving the car, so these switchings consistently happen at longitudinal movement of one of shaft of a box of speeds, the device reduces the general dimensions of engines, technologically and the Lantern &ndash broadcast has small prime cost

; it is very effective reducer with the shaft which are coaxially executed entrance and output, all interacting surfaces: either flat, or cylindrical, only one surface is executed on the axial circular line in section by the rotation plane in the form of the closed sinusoid, the efficiency of transfer is big, the transfer relation of one step to 30 - ti, transfer is simple, technological, has small prime cost in production.

Makholet with valvate system of a wing has two versions of the drive: internal combustion engine and muscular drive. This aircraft maloenergozatraten as makhokryly system of flight, in distinguishing from screw, has no fast rotations in interaction with air and the small tilt angle of a wing on the relation of its longitudinal plane on a triangle of decomposition of vectors of speeds creates the high longitudinal speed of the movement of a makholet. Makholet has the internal combustion engine is more low-power, but through a reducer with large transfer number his wings have a big torque at their move. Operation of the screw is less effective for progress flying the device, than work of the waving wing.

The water entertaining device allows two the person well to have a good time on the beach in water by rocking on water interesting a swing and between these two people is available interestingly syuzhetno - tematichno the painted big rigid sphere which the possibility of rotation around a horizontal axis from - for the fact that in it there is a liquid which the special internal device due to rocking of this a swing rises from the lower tank in top that leads to the fact that the center of gravity of a sphere rises above an axis of rotation has and it leads to a sphere pro-collar on 180 * and at the same time drawing on a sphere very interestingly changes as becomes surveyed other hemisphere of this sphere. Business will be very effective and profitable

Muscular screw swimming means is favorable to business that it is possible to carry out in large quantities these devices, to install them on swimming means, purchased at the drougy producer, and to sell at the much bigger price, than each this swimming means was bought. At the buyer this muscular screw swimming means will make great success for the reason that on this swimming means it is possible to float quickly without getting tired as the movements of legs are simple and convenient, it is possible to lean against a sitting back.

Muscular water-jet swimming means allows to have very favorable business as it is possible to buy inflatable boats and to attach by means of rivets and glues the water-jet device which performance rather simple and to sell this swimming means already at the much bigger price, so this swimming means will be widely demanded by the buyer from - for what on is mute it is possible to float quickly, it is easy to operate it and at the same time not to have any fatigue as the movements by legs are simple and convenient and there is an opportunity to lean conveniently a back in a sitting back.

The electric lock has very simple device, but for malefactors it almost not opened as in any attempt of penetration into it the chain, but not on opening of the lock becomes isolated. It is easily possible to adjust favorable business as other producer can always have a purchased mechanical part of the lock.

The piston car with magnetic communication has the transformation mechanism vozvratno - a forward dvideniye of pistons in a rotary motion of the plug with a gear wreath through a thin cover, for example, from the titan through permanent magnets with efficiency very close to 100%.

Lantern &ndash broadcast; it is very effective reducer with the shaft which are coaxially executed entrance and output, all interacting surfaces: either flat, or cylindrical, only one surface is executed on the axial circular line in section by the rotation plane in the form of the closed sinusoid, the efficiency of transfer is big, the transfer relation of one step to 30 - ti, transfer is simple, technological, has small prime cost in production.

The automatic transmission has the simple and reliable centrifugal device, works for electroturning on of couplings of coupling.

The offered device very much simplifies procedure of switching of speeds when driving the car, so these switchings consistently happen at longitudinal movement of one of shaft of a box of speeds, the device reduces the general dimensions of engines, technologically and the Similar scooter has small prime cost

has the hinged mechanism of transformation of the movement which compact and reliable, it distinguishes it to the best in comparison widespread in which the torque is formed on small coal of a full circle and besides at the expense of the bending moments. The offered scooter has small dimensions, is technological and has small prime cost in production.

The offered device most of all approaches as the high-speed vehicle, to disabled people who have good health and a greater effect in hands this device can be installed on many wheelchairs by means of clamps with installation on an oska wheel, this device polzvolit quickly to move to long distances, it technologically, has small prime cost in production

Transfer with bodies of swing has transfer relation of one step to 30 - ti, coaxial among themselves entrance and output shaft, small dimensions, high efficiency, technological and has low prime cost in production.

The offered transfer simplifies and reduces the price of performance of devices for transfer of rotation on other shaft parallel to it with the transfer relation equal to unit, with the direction in the opposite direction. Now such device extended everywhere is internal gear gearing with the transfer relation equal to unit

the Offered coupling coupling from - for the fact that it has no frictional surfaces, can be applied very effectively in fire-dangerous conditions, for example, in mines, this coupling is simple and technological in production, has small prime cost in production, all indicators in work at are not really high. Has safety a svoytv.

The offered coupling of coupling is very simple and reliable on the device, it could be very successfully used everywhere and especially in automatic transmissions, it is technological and has small prime cost in production.

The offered mechanism of transformation of the movement for volume cars the most effective of all known, it is simple in production, in it is not present, unlike the analogs difficult in performance of surfaces, it is technological and has small prime cost in production.

Makholet with valvate system of a wing has two versions of the drive: internal combustion engine and muscular drive. This aircraft maloenergozatraten as makhokryly system of flight, in distinguishing from screw, has no fast rotations in interaction with air and the small tilt angle of a wing on the relation of its longitudinal plane on a triangle of decomposition of vectors of speeds creates the high longitudinal speed of the movement of a makholet. Makholet has the internal combustion engine is more low-power, but through a reducer with large transfer number his wings have a big torque at their move. Operation of the screw is less effective for progress flying the device, than work of the waving wing.

The offered milkchurn - the rotor high-performance device executed on the basis of pumps with alternate delay of the movement of their rotors.

The offered magnetic engine belongs to power devices which use energy of permanent magnets at their interaction with each other. This device rather simply and technologically in production, at the correct production (forces of constant magni act effectively on small distance) it is possible to receive the device which on a shaft of selection of power will give a big torque at its big turns.

The magnetic engine contains 2 closed magnetic tapes established with a tension on the rams rotating in one plane on one platform and at the same time tapes as much as possible before sliding almost without friction are pulled together by one drums and straight sections of these tapes make an acute angle. The device works as the fuel-free engine

the Offered conveyor differs from widespread in the fact that it has higher than an efficiency. The tape cloth at it is made of metal or rigid plastic, performance cheap and technologically.

The offered carriage for disabled people differs in the transformation mechanism vozvratno - a rotary motion in rotary. In the offered carriage this mechanism of transformation is much more compact, more convenient in work and has bigger efficiency.

The wheel has the increased consumer properties, so it has no pneumatics, but has to a tezha demferiruyushchy properties, as a wheel on pneumatics. Due to that, the wheel has only a thin uniform layer of rubber in the form of a protector for coupling of a wheel with the road, it does not demand special balancing as its details are made of metal which has, unlike rubber, specific weight on its volume same everywhere, and production from metal is in rigid dimensional limits.

The offered cardan transfer is the most effective of all known because in it contacts on a torque transmission come without any deviations from the bisector plane and synchronism of a torque transmission is equal to 100% and it means that in the kinematic scheme passing through this cardan transfer there will be no vibrations that provides not to have losses of efficiency and destruction of details.

The offered grinders are offered in two options: for large crushing of plastic bottles and for further crushing in the same technological chain to particles of the smaller size which by the small sizes can be already filled up in press forms for further receiving details of a certain form from them.

The device is used in elevators, various elevators including mine. This device has many advantages before widely applied (they, as a rule, are run by electronics which, judging by messages in news on television, already many times brought from - for what there were human victims), it will never bring as at a movement reverse it leans against motionless part on all process of a reverse, this device is exclusively simple and very reliable.

The offered wave engine uses energy of a wave in open reservoirs in windy weather, has a hydraulic engine, a float and the generator of current. Its production technologically, the knots which are widely applied in other products can be used, on a shaft of the generator of current rotation with high angular speed moves. The device is reliable and safe.

The vortex heater of the

environments On figs. 1 the offered heater, a general view is schematically shown; on figs. 2 - coal mine A - And on figs. 1; on figs. 3 - the screw on a pipe in development; on figs. 4 - coal mine B - B on figs. 3.

sosotoit the Offered heater from the case 1 in which there is with a possibility of rotation a shaft 2 drives 3. On a shaft 2 the screw 4 with the step of the screw line of its navivka changing aside more, and less on the navivka course is rigidly installed. On the screw 4 the elastic pipe 5 on which in its end there is conic part 6 is rigidly established, and also the screw 7, with the same direction of the screw line of its navivka, as well as at the screw 4, and also the changing step of the screw line of its navivka is rigidly installed. The screw 7 is executed from the tuning forks 8 having couples of plates turned towards each other as shown in figs. 3 and 4 where the arrow showed the direction of a stream of the environment in the case 1 in relation to this corner between plates 9. Korus 1 has entrance and vykhody openings 10 and 11 respectively.

During the operation of the drive 3 liquid or gaseous arrives through an opening 10 and leaves - through otverty 11. This pressure is created by screws 4 and 7 and vibrations of plates of 9 tuning forks 8, as in the vibration pump. Unevenness of a step of a navivka of screws 4 and 7, and elasticity of a pipe 5, and also vibration of plates 9 create high-frequency fluctuations which are followed by allocation of a tep, and through an opening the 11th Wednesday leaves heated. In case of gaseous Wednesday Wednesday near an opening 11 has rather big pressure at the expense of its warming up and the impact on screws 4 and 7 creates a torque which will be sufficient that the shaft 2 rotated also at the switched-off drive 3 or twisted, for example, the generator of electric current. The movement of the environment on figs. 1 it is shown by an arrow.

The vortex heatdrill

On figs. 1 the offered heatdrill, a general view is schematically shown; on figs. 2 - coal mine A - And on figs. 1; on figs. 3 - coal mine B - B on figs. 1.

the Offered heatdrill consists of an upsetting pipe 1 in which there is the central pipe 2 which through radial cores 3 and 4 is rigidly connected with a core 5 on which on free landing there is a screw 6 which is on free landing and in a pipe 2. The screw 6 is executed with an uneven step of the screw line of its navivka and has sites with opposite directions of this navivka. The pipe 2 has a ring ledge 7 and comes to an end with a conic rastrb 8 which at distance “ and “ equal 10 - 1000 mm from the end of a pipe 1. The pipe 2 is filled under big pressure liquid, for example, water, on the drawing is not shown.

the Offered heatdrill works at the expense of the big pressure of water in a pipe 2 which downloads there from above the powerful pump. The pipe rests 1 end at the bottom of a well against burimy layer. Water in the form of high-temperature mix of water and couple under a big pressure and high angular speed of rotation through a bell the 8th pointed whirlwind crashes into burimy layer, tearing it on the osey line of the heatdrill and together with splinters of layer slides on layer, expanding rotation radius. In a space interval between a pipe 1 and a pipe 2 the powerful other pump which is on a surface creates the lowered pressure. Water steam weight with splinters of layer directs in this discharge and moves upward. The ledge 7 does not allow to get to this space to big splinters and they are pounded finally. The twisting and a warming up of water occurs due to its movement on the screw 6 where in the beginning vials of steam in the direction of water which vskhlapyvatsya then with allocation of big thermal energy on an axis of a core 5 from vibration of the screw 6 are formed.

The molecular

engine the Offered engine contains the case 1 in which on axis 2 there is a muffled pipe 3 mown from two parties on which the screw 4 with an uneven step of the screw line of its navivka which is executed from the tuning forks 5 having couples of elastic plates 6 turned to each other and directed by this corner towards to the direction (on figs is rigidly installed. 4 it is shown by an arrow) an air stream in the case 1. The pipe 3 bevels with a gap is in openings entrance and output respectively 7 and 8.

the Offered engine works as follows. On a shaft 2 the torque the drive which on the drawing is not shown moves. The screw 4 at rotation of a shaft 2 and pipes 3 creates a pressure of the movement of the gas environment, for example, of air in the direction of the arrow shown on figs. 1, from an opening 7 in an opening 8 via the case 1. This pressure is created at the expense of screw 4 rounds, and also due to heating of air near an opening 8. This heating happens due to the high-frequency fluctuations of air coming from vibration of kamertonny plates 6, a pipe 3 and from the pneumoblows coming from unevenness of a step of the screw line of a navivka at the screw 4. This pressure increases also impact on air of plates 6, as in the vibration pump, at the expense of

of the fact that plates are turned towards to an air stream. When air from operation of the drive heats up enough, the arising pressure of air begins to rotate a shaft 2 independently and on it instead of the drive connect loading, for example, the current generator. In such conditions the shaft 2 can rotate beyond all bounds long until loading for any reasons does not increase to unacceptably big size or any of openings 7 or 8 is not blocked.

The rotor

car On figs. 1 the offered rotor car, a general view is schematically shown; on figs. 2 - coal mine A - And on figs. 1;

on figs. 3 - coal mine B - B on figs. 1.

the Offered car contains the case 1 in which with a possibility of sliding and rotation are a gear wheel 2 and 3, the reels 4 and 5 and these couples continuing them in the axial direction respectively which are in external gear gearing and having are on respectively shaft 6 and 7 which are in the case 1 with a possibility of rotation. Between the reel 4 and the case 1 there is a working cavity 8 having soaking up and forcing according to an opening 9 and 10. On the reel 4 several teeths 11 which are continuation of teeths of a gear wheel 2 and which serially at rotation of gear wheels 2 and 3 can be in one gear vpdena 12 on the reel 5, the gear hollow of a gear wheel which is continuation 3 are executed. The cylindrical surface of the reel 4 slides on a tsilinrichesky surface of the reel 5, and teeths 11 slide on a cylindrical surface of a cavity 8.

the Offered car as the pump works at rotation of the leading shaft 7. Drums are rotated in the direction of arrows on figs. 3, and the pumped-over liquid moves through openings 9 and 10 on an arrow on figs. 3. It occurs because reels 4 and 5 slide the friend on the friend, and teeths 11 slide on the case 1 in a cavity 8. During the operation of this machine the engine everything occurs upside-down.

A wind turbine

On figs. 1 the wind turbine, a general view is schematically shown; on figs. 2 - coal mine A - And on figs. 1; on figs. 3 - the screw in development in the increased scale; on figs. 4 - coal mine B - B on figs. 3.

the Offered verodvigatel contains a platform 1 in which with a possibility of rotation there is vertical hollow axis 2 through which in the generator 3 currents approach an electricity cable 4. The generator 3 currents has a shaft 5 on which the hollow cone 6 which is rigidly coaxially connected with a casing 7 with openings 8 on its cylindrical surface is rigidly coaxially established and in which rigidly evenly on a circle the identical blades 9 bent in the tangensialny direction are installed. On a casing 7 the bell 10 is rigidly coaxially established. On a cone 6 the screw 11 made of the tuning forks 12 executed from couples of plates 13 with a gap 14 between them which planes make a corner as it is shown on figs is rigidly installed. 3 and 4. The generator 3 currents is rigidly connected with a flyugerny plate 15.

the Offered wind turbine works as follows. The Flyugerny plate 15 establishes a wind turbine on an axis so that wind blows in the direction of an arrow on figs. 1. Rotation of a bell 10, a casing 7, a cone 6 and a shaft 5 occur on the arrow shown on figs. 2. Air, passing through the screw 11, interacts with tuning forks 12 on an arrow on figs. 4, this interaction creates ultrasound which being reflected from a surface of a bell 10 and a cone 6, creates zones of allocation of heat. The 7th air gets to a casing heated to rather big temperature which leads to expansion of air in a casing 7 and to its exit through openings 8 with a high speed that creates a big torque and rotation on an arrow on figs. 2 with high angular speed.

The engine with an external supply of heat

the Offered engine contains a ring 1 which is radially connected with a disk 2 through thermosensitive elements 3 which by the first option are executed in the form of a wire with a diameter of 0,1 - 7 mm, and by the second option - in the form of the tonkotely shovels having thickness of 0,1 - 7 mm, having fastening to a ring 1 as shown in figs. 3, and springs 4. The ring 1 through shovels 5 is rigidly connected with a disk 6 which has the shaft 7 which is in the bearing 8. The disk 2 is rigidly connected with the shaft 9 which is in the bearing 10. Shaft 7 and 9 have eccentricity “and“. Bearings 8 and 10 are installed in the case which on the drawing is not shown and in which the heater 11 and a cooler 12 are installed. Thermosensitive elements 3 are made of metal with big coefficient of thermal linear expansion, for example, from steel.

the Offered engine works as follows. The starter (on the drawing it is not shown) rotates a shaft 8. This rotation through thermosensitive elements 3 and springs 4 indulges on a ring 1, and through it through shovels 5 and a disk 6 on a shaft 7. This rotation on figs. 1 it is shown by an arrow. After achievement of this rotation of the speed of 1000 revolutions per minute the heater 11 turns on, and cooling of thermosensitive elements 3 happens in a cooler 12 where air shovels 5, and by the second option of performance and thermosensitive elements 3 as by this option they are executed in the form of shovels too, is banished under a pressure through thermosensitive elements 3 that forces them to lower their temperature of heating. Springs 4 of - for eccentricity “and“ from above on the drawing of figs. 1 have stretching naybolshy, and from below - naymenshy. In the heater 11 thermosensitive elements heat up and extended that allows springs 4 to reduce force of the stretching and to be shortened in their axial direction. In a cooler 12 all occur on the contrary. Before turning on of the heater 11 the picture of tension of springs 4 and their length along an axis is symmetric concerning the plane passing through axes of rotation of shaft 7 and 9. It holds a ring 1 and a disk 2 from rotation in any party independently, and at external rotary impact on them they come back to this position of symmetry of tension to eccentricity “and“ again after the termination of this external influence. When the heater 11 turns on, this symmetry is broken also shaft 7 and 9 receive a torque towards obtaining symmetry of tension to eccentricity “and“. Turning on of the heater 11 after creation by a starter of this rotation with a speed from 1000 revolutions per minute is necessary to avoid heating of thermosensitive elements 11, harmful to their working capacity. The torque to move and be removed can on any shaft 7 or 9 and from any shaft 7 or 9.

The mass propeller - the gravitational

engine the Offered mass propeller - the gravitational engine consists of the case 1 having guides 2 in which with a possibility of the movement the friend on the friend there are freights 3 which are in gear gearing with the cogwheel 4 having a shaft 5. With directing the 2nd freights 3 interact through the wheels 6 which are in pairs connected by axes 7 which are in freights 3 with a possibility of rotation. For normal interaction with a wheel the 4th freights 3 have deepenings 8, and for reduction of friction at their sliding the friend on the friend freights 3 have deepenings 9 in which there are balls 10.

the Offered mass propeller - the gravitational engine works as follows. For its work as the propeller on wheels 5 from a shaft 5 (on figs. 1 it is shown by an arrow) rotation from the drive moves and the case 1 moves in the direction of the arrow shown on figs. 1 as the mass of the freights 3 located from above always are more, than - from below, as the mass of freights 3, located from above always are more, than - from below, as they are located almost vertically, their quantity is more. If we deploy the case 1 on 90 * around an axis of a shaft 5 on an arrow, then we will receive for the same reasons the gravitational engine with sjemy a torque on the same arrow from a shaft 5.

On figs 1 the cycle mobile, a general view is schematically shown; on figs. 2 - coal mine A - And on figs 1; on figs. 3 - coal mine B - B on figs 1.

the Offered cycle mobile contains a frame of I on which the case 2 in which with a possibility of rotation there are cylinders 3 and 4 which are in periodic gear gearing

a gear hollow of the 5th cylinder 3 with the teeths 6 executed evenly on the cylinder 4 is rigidly installed. Besides cylinders 3 and 4 have parallel connection and through gear external gearing with the transfer relation equal to quantity of teeths 6, cogwheels 7 and 8. Cylinders 3 and 4 are installed with a possibility of swing with sliding of their cylindrical surfaces the friend on the friend In the case 2 there is a working volume 9 having valves 10 and II inlet and final respectively which in pairs report two press cameras 12 with a working capacity of 9. Press cameras 12 consist of a motionless plate 13 and the mobile plate 14 connected with the case 2 the hinge 15 and having lengthening 16 with the console 17. Plates 13 and 14 are sprung from each other by a spring 18 and connected for sealing of volume of the press camera 12 by flexible fabric 19. On a plate 14 there are valves 20 and 21 inlet and final respectively. On a frame of I 22 wheels 23 are established with a possibility of rotation on axes, for each of which the brake shoe 24 on a core 25 with the handle 26 which is in the hinge 27 on a frame of I is established. The shaft 28 is installed with a possibility of rotation in the case 2 and rigidly connected with the cylinder 3, a wheel 7 and driving wheels 29. Cameras 12 are reported with a working capacity of 9 via valves 10 and II

space 30 in the case 2.

the Offered cycle mobile works as follows.

of People, sitting on a cycle mobile (on the drawing also sitting is not shown too) legs alternately presses via consoles 17 and lengthenings 16 on a mobile plate 14, squeezing a spring 18. Air through working space 9 passes from one press camera 12 into another and vice versa. Operation of valves 10 and II allows the air movement only in one direction that provides rotation of cylinders 3 and 4 and cogwheels 7 and 8 in the direction of the arrows shown on figs. 2 and 3. The valve 21 provides an air suction if it became less, than it is necessary for normal operation of press cameras 12, and the valve 22 will allow to delete the excess air which appeared in these spaces. Traffic control of a cycle mobile is exercised due to braking of one of forward wheels of 23 blocks the 24th handle 26 due to rotation of cores 25 in hinges 27. Rotation of driving wheels corresponds to rotation of a shaft 28, is rigid connected with them, and also rigidly connected with the cylinder 3 and a cogwheel 7.

The GRAVITATIONAL ENGINE DIFFERS FROM UPRUGOSILOVY ONLY in THE FACT THAT IN IT INSTEAD OF CYLINDRICAL SPRINGS FREIGHTS.

F O R M At L of A And Z of O B R E T E N And I am

the Gravitational engine containing the case, freights which are movably established on the case, differing in the fact that in the case about a possibility of rotation there are shaft, kinematic connected with each other because their flat ends are with a possibility of sliding in longitudinal cuts of brackets which have sites in the form of axes on which with a possibility of rotation there are plugs connected by flexible communications via the blocks which are in the case with a possibility of rotation, with freights and at the same time these brackets have ledges, which are with a possibility of sliding in circular kanakas, executed in the plane a vrashcheiya of shaft and is excentric to them on the case, and the flat ends of shaft are turned rather each other in the planes of rotation of shaft or this turn is made relatively each other by these eccentricities, and the flat ends of shaft are in one plane.

On figs. 1 the offered engine, a general view is schematically shown; on figs. 2 - coal mine A - And on figs. 1; on figs. 3 - a type of B on figs. 1.

the Offered engine contains case racks 1 in which with a possibility of rotation there are shaft 2, the flat ends 3 which are with a possibility of sliding in cuts of 4 brackets 5 on which axes 6 are established with a possibility of rotation of the plug 7, connected by flexible ropes 8 via the blocks 9 which are with a possibility of rotation on the axes 10 established on racks 11 with freights 12. Brackets 5 have the ledges 13 which are with a possibility of sliding in the circular flutes 14 executed with eccentricity “ and “ on racks 1 concerning shaft 2, which ustanovena when 3 rotation of brackets 5 in different phases gives provisions of their ends.

the Offered engine works because freights 12 through ropes 8 and plugs 7 force to rotate brackets 5 because eccentricity “ and “ at interaction of ledges 13 with flutes 14 always give a torque from above always more, than from below. Rotation of shaft 2 on figs. 3 it is shown by shooters.

The centrifugal

filter the Offered filter consists of a vertical rack 1 with its platform 2 with which screw connections 3 connected the case 4 in which are a shaft 5 on which are persistently - basic bearings 6 and 7 and consolidation 8. The shaft 5 is rigidly connected with the screw 9 which is rigidly connected with a hollow detail 10, the being its disk-shaped part with a possibility of sliding with the case 4 and on which the screw 11 with the screw line, opposite in the direction of a navivka, to the screw 9 is rigidly installed. Near the screw 11 there is a ring 12 with a possibility of sliding with the case 4, having rigid communication with a detail 10 through cores 13. The bearing 6 is connected with the case 4 through bolts 14, and the bearing 7 - through springs 15. Between the bearing 7 and a detail 10 there is with a possibility of sliding on a shaft the 5th disk 16. Over the screw 11 there is with a possibility of its straightening in the longitudinal direction a filtering element 17 fixed by its parties for a ring 12 and a disk 16. In the case 4 branch pipes 18, 19 and 20 are executed.

the Offered filter works at rotation of a shaft 5. Not filtered liquid comes through a branch pipe 18 to the screw 11 and having passed through an element 17 already filtered liquid gets to space at a rack 1 and through a branch pipe comes out 19. Before a disk 16 in the screw 11 undesirable suspensions which push away a disk 16 from a detail 10 collect, squeezing springs 15, passes into the screw 9 which advances them in space between the case 4 and a detail 10 which they leave 20 through a branch pipe.

The vortex

heatgenerator On figs. 1 the offered heatgenerator, a general view in a section is schematically shown; on figs. 2 - coal mine A - And on figs. 1.

the Predlozheny vortex heatgenerator consists of the cylindrical working camera 1, on a wall 2 which rigidly coaxially an ustanovlea a pipe 3 with a thickening 4 of its walls and having thickness of its wall of 2 - 20 mm on its main length and which will be spaced on distance 10 - 150 mm from an opposite wall of the 5th camera 1. On a pipe 3 at distance of 10 - 150 mm from a wall 2 the screw 6 having the sites which are consistently changing on its length with the different direction of a navivka of their screw lines is rigidly installed. On a senka 2 there are entrance and output respectively branch pipes 7 and 8 for working liquid (on the drawing it is not shown), which can be water, glycerin or glycerin with water. On the working camera 1 there is a heat exchanger 9 with branch pipes entrance and output respectively 10 and 11.

the Offered heatgenerator works due to the movement of working liquid through branch pipes 7 and 8 under the pressure created by the pump which on the drawing is not shown. At the same time liquid gets on the screw 6 in the beginning. At the same time at the expense of the water hammers in a stream of liquid arising in places of transition of one site of the screw 6 in another where there is a change of the direction of a zakrutka of a stream according to the changing direction of the screw line of a navivka there are vials of steam and gas which is emitted from liquid. These bubbles vskhlapyvatsya with allocation of heat on the axial line of a pipe 3 where the energy from vibrations reflected from an internal surface of a pipe 3 is focused. This heat is transmitted through the heat exchanger 9 to the consumer.

The magnetic

engine On figs. 1 the offered engine, a general view is schematically shown; on figs. 2 - a look And on figs. 1.

the Offered engine contains the case 1 on which rigidly in parallel ustanovdena of axis 2, 3, 4 and 5 on which with a possibility of rotation there are respectively reels 6, 7, 8 and 9. On reels 6 and 7 the magnetic tape 10 is tense, and on reels 8 and 9 the same tape 11 is tense. Tapes 10 and 11 can be magnetized so that they are attracted or make a start from each other. Reels 7 and 9 are pulled together so that tapes 10 and 11 are rolled the friend on the friend, and further disperse at an angle “ “ equal 1 - 30*.

the Offered engine works due to magnetic interaction of tapes 10 and 11 and at the same time in case of an attraction of tapes 10 and 11 to each other the drum 7 is rotated clockwise, and the reel 9 - counterclockwise, and when tapes 10 and 11 make a start from each other, these rotations are directed to reverse sides. The torque is removed from any of reels 6, 7, 8 and 9.

Installation for desalting of

water the Offered installation consists of the vortex heatgenerator 1 in which rigidly one end established a pipe 2 with a site 3 thinning of its wall to 1 - 20 mm. On site 3 the screw 4 with the alternating sites which length differs by 3 - 35 times is rigidly installed. These sites have the different directions of a navivka from screw the line. For big sites this direction corresponds to passing of the freshened water on them with a naymenshy resistance. The freshened water takes place of an entrance on the screw 4 through a branch pipe of the 5th pump 6 connected by shaft 7 with the drive 8. The freshened water in the form of steam and the slurry rest has an exit through a branch pipe 9 in a broad tank 10 from which steam through a branch pipe the 11th compressor 12 connected through a shaft 13 with the drive 14 moves through a branch pipe 15 in the condensation device 16 executed (on the drawing it is not shown) the coil which is in the cooling environment, for example, in flowing water.

the Offered installation works due to supply of the freshened water with the pump 6 for the screw 4. At the same time the freshened water on big sites of the screw 4 due to its screw movement receives the direction of the movement from the pump 6 and from it resistance of its movement falls, and on small sites from - for the opposite direction of rounds - increases. On small sites water hammers are created that provides active education in water of vials of steam and gases which when passing through a pipe 2, on its site 3 vskhlapyvatsya from - for focusings of energy of water hammers on a site 3 axis. Then the remains of the freshened water are brought out of a tank 10, and steam the compressor 12 gets on the device 16 from which the consumer receives desalinated water.

The rotor car of MM

the Offered car contains the case 1 in which with a possibility of rotation there are parallel shaft 2 and 3, rigidly connected with respectively cylinders 4 and 5 on which cylindrical thickenings 6 and 7 on an arch 130 - 180 * which are with a possibility of sliding with an internal cylindrical surface of the case and according to cylinders 5 and 4 are executed respectively. On shaft 2 and 3 the cogwheels 8 and 9 which are in gear gearing with the transfer relation equal to unit are rigidly coaxially established respectively. In the case 1 are executed inlet and final according to an opening 10 and 11.

the Offered car as the pump or the compressor works at rotation of the leading shaft 2 or 3. Shaft 2 and 3, cylinders 4 and 5 and thickenings 6 and 7 rotate in the direction of the arrows shown on figs. 1 and 3, it provides gear gearing of wheels 8 and 9. That shaft 2 and 3 are connected by this gear gearing, and thickenings 6 and 7 at the same time are established at assembly in provisions as it is shown on figs. 1, thickenings 6 and 7 serially drive liquid or gas in the case 1 in the direction of the arrows shown on figs. 1. During the operation of the machine in quality a hydra - or a pneumatic actuator or the heat engine everything occurs upside-down.

A

broadcast On figs. I is schematically shown the offered transfer, a general view, a longitudinal section; on figs. 2 - a look And on figs. 1; on figs. c - a look And on figs. 1 after turn of shaft on 90 °.

the Offered transfer consists of the case I in which with a vozkmozhnost of rotation there are shaft 2 and 3 having respectively clowns 4 and 5 who are with a possibility of rotation in a plate 6. Distance between axes cylindrical poverkhnoskty it is eccentric 4 and 5 equally in distance between axes of rotation of shaft 2 and 3. The plate 6 has the longitudinal cut 7 which is on its middle and in which with a possibility of sliding there is an axis 8 which is rigidly connected with the case I and which is in the plokskost passing through axes of rotation of shaft 2 and 3, in the middle between them.

Transfer works at rotation any of shaft 2 or 3. At the same time the conducted shaft rotates with the transfer relation equal to unit opposite rotations of the leading shaft aside as it is shown on figs. 2 and 3 shooters.

It is difficult for inventor with investor to find a common language because the investor very often has negative experience with the inventor, many of which are casual people in invention therefore I suggest the investor to employ the project manager to whom he would entrust money for introduction and who would employ experts on performance of a prototype, industrial samples and establishing production. I for the salary appointed to me as to one of experts, would conduct all technical outcomes which yavltsya by competence of the inventor and then would apply for 10% of profit under the law in favor of the inventor. I often write with

In the correspondence to the investor the following:

“ Without money I cannot make a prototype, and all “ ZA “ and “ PROTIV “ can reconcile without any psychics and high opinion of authoritative people only the prototype made without mistakes. Appeals of some an investment ditch to do a prototype for kopeks of casual details and the materials - it is big provocation against common sense. I have at all no desire to take from the investor money for a prototype (I any have no pledge), and venture investors nobody wants to be - to risk the money for production of a skilled image. Absolutely stalemate. But an exit is. The investor considers each inventor as the swindler and the extortioner. At the same time a situation in the world with energy carriers now critical - the tepereshny world economy and the one who reduced the price of energy carriers for himself very much depends on them, that prospers economically. Therefore in the world market power devices which can give this reduction of price of energy carriers are very much appreciated. I have such inventions and they can give big effect as perfectly solve almost all badly solvable factors in already available latest these power devices. But everything rests against the stalemate described above. But the investor who really would like to have remarkable business on this project can positively resolve with me this everything the bothered situation. I offer the following. It is not necessary to consider me as the swindler and the extortioner. The investor undertakes itself a project management or charges ethat to the person whom does not consider as the swindler and the extortioner. Forms team of engineers and workers and does a prototype. The necessary details according to the ordered drawings can make on the Internet though on that doomsday. I direct on the Internet (Skype, phone and the scanner will provide all complex of communication) on the questions concerning the invention (the detailing, to a no - Hau and so on), on all engineering questions I set a task for engineers, engineering routine work do not lay down on my shoulders - it is not necessary to save on me money, I just will not take out such enormous cart. If you entrust me the money, then I will be able to employ this command and completely all project management to undertake. You consider that introduction of this project can be made for kopeks, to be mistaken, but it - Your right. “

The modern system of relationship of the investor with the inventor

does not need elections of the most effective inventions,

at all because only 0,5% of all investors are inclined to pay attention to these inventions, the others chose by

ways of the investments &ndash for a long time; it is already good to invest in

the mastered projects, but with small completions already with new investors.

So, in vain I invented 302 very effective inventions - effective inventions to today`s

to the investor absolutely not necessary, as well as “ bright future “ on our planet,

buznes it is in essence exclusively stupid and digs a grave to all mankind -

very much supports alcohol and an other infection for mankind. all these

A “ snare “ bumagotvorchestvo of relationship of the investor with the inventor -

it is that barrier which helps them to win constantly against common sense

the Inventor and the engineer in many respects differ from each other. The engineer has to know well the specialty and solve especially tactical problems and is strict according to engineering regulations, the inventor thinks absolutely on another and it has a main task: to have a clear idea of the set inventive task and to find the most favorable solution on this task and there are already withdrawal pains of all old. It is already stressful situation and mentality of the normal person tries to keep stability - predictability, everything that will be will be new and unknown, and uncertainty - this heaviest burden for the person. Decisions it is necessary to shovel a big set and comes quite doomed to further life most often not from consciousness any more, and from subconsciousness which is a little connected with direct human emotions. Cht