How to clean the monitor screen in house conditions?
O - about - oh, trouble! On your monitor spots appeared! Who works as
with the computer, that faces this problem sooner or later.
How to resolve it? Of course, now there are various means for cleaning of monitors and in a workshop it is possible to carry - let experts will work. But if you have no opportunity to buy special means and not to reach a workshop, then you should not become despondent. Let`s try to resolve this problem in house conditions make-shifts.
It is known that there are two types of monitors: The CRT monitors having a kinescope with cathodic electronically - a beam tube and LCD monitors, or according to other name liquid crystal.
We will begin with safety measures . Where without it?
needs to follow the following rules:
1. The monitor has to be completely deenergized. Arrange forks of network wires of the monitor and the computer before yourself on a table once again to be convinced that devices are switched really-off.
2. The CRT monitor having a kinescope with cathodic electronically - a beam tube, has to be cut off power not less, than in two hours prior to work. Pull out a cord from the socket (and too cut off power the system unit), but not just press the button.
For work you need water, with the temperature about 30 º With, about 50 grams, soap children`s and napkins lint-free.
Now it is possible to start performance of process of cleaning of a surface of the screen of the monitor.
Especially carefully carry out operations of cleaning of LCD screens of monitors, in order to avoid damage of a liquid crystal matrix.
Step 1 : be Once again convinced by
that points 1 and 2 of safety measures are implemented.
Step 2 : Take
one napkin, moisten in the prepared water and wring out it so that it was damp, but when pressing water did not drip.
Step 3 : the Wrung-out napkin accurately, without pressing, wipe with
all surface of the screen, since the top part so that the screen was humidified.
Step 4 : Moisten with
other napkin in the prepared water, then slightly soap children`s soap. Then, wring out it the same as in a step 2.
Step 5 : the Soaped and wrung out napkin accurately, without pressing, wipe with
all surface of the screen, since the top part. Pay special attention to edges and corners of the screen where there can be a dirt.
Step 6 : Take
the third napkin, moisten in the prepared water and wring out it so that it was damp, but when pressing water did not drip.
Step 7 : the Wrung-out napkin accurately, without pressing, wipe with
all surface of the screen, since the top part so that from the screen to remove the soap remains.
pay Special attention to edges and corners of the screen where there can be a soap.
If necessary steps 6 and 7 can be repeated.
Step 8 : Take
the fourth napkin, dry.
Is accurate, without pressing, wipe all surface of the screen, since the lower part.
Step 9 : Look at
under different corners on a monitor screen surface. If you do not see stains, then process of cleaning is finished. At detection of single residual stains, accurately remove them with a pure dry napkin.
Step 10 : Be convinced by
that operation is done qualitatively, without zatek from badly wrung out napkin and drying is not required.
Step 11 :
Clean a workplace from all materials: waters, soaps, wet and dry towel wipes, wipe a table with a dry napkin.
After the carried-out works, having turned on the monitor, you will see bright color scale of the favourite monitor again.
of Pleasant work!